∏ NODE

∏-box Usage

CONNECT TO THE ADMINISTRATION INTERFACE

Check the WiFi around and connect to the WiFi called pibox (or the name you set up)
then, open a browser and open the address 192.168.100.1
the page will ask you to enter a login and a password, it should be by default : pibox / pnodeaccesspass
then, you're in to change the settings ! here what looks like the interface

INTERFACE

The upper side of the interface shows the ip adress of the device, and which device provides internet (if connected).
The lower side is divided in two modes : Online mode (with internet access) or Offline mode (without internet access).

UPPER PART

WIFI CONNECTION : you can enter a SSID and a password to connect to your favorite WiFi network. Ideal for connecting outside on a telephone that shares its connection. In case the info is wrong, the PiBox will search to create a connection on Ethernet (eth0), and in the case none of those options works, will enter the offline mode

UPLOAD FILES : allows you to select multi files on your hardware and put it on the storage spot of the PiBox.
The files are stored in the following folder : /home/pi/pibox_V2/sounds/
Removal or renaming of files can be done either through ssh, by connecting to the pi with a keyboard and a monitor, or by inserting the SD card in your computer, and from your desktop.

ONLINE MODE

INPUTS: choose an input from the following

OUTPUTS: select the output of your transmissions
All outputs can be associated simultaneously, and freely !

OFFLINE MODE

The PiBox in offline mode is fully functional, except for the sources that comes from internet and necessitate a connection, same for the broadcast.

INPUTS: choose an input from the following

OUTPUTS: choose a output mode, all outputs can be associated freely

OPTIONS

Change SSID name

edit the file /etc/hostapd/hostapd.conf

   $ sudo nano /etc/hostapd/hostapd.conf

change the SSID by entering youn own value

     interface=wlan0
     driver=nl80211
     ssid=myssid
     hw_mode=g
     channel=7
     wmm_enabled=0
     macaddr_acl=0
     auth_algs=1
     ignore_broadcast_ssid=0

then

   $ sudo reboot

Change ssh password

by entering the following

   $ sudo raspi-config

then

   $ sudo reboot